Mount Partisi NTFS di Fedora Core 4

August 8, 2005 by maseko

Kemaren, Mandrake 9.2 diganti Fedora Core 4, Fedora Core pertama yang aku coba. Cuman kok gak bisa mounting partisi NTFS. Barusan googling nemu petunjuknya di http://www.mjmwired.net/resources/mjm-fedora-fc4.shtml#ntfs. Ntar mau cobain kalo dah download modulnya.

Either recompile your kernel for NTFS read support. (Hard)
Or obtain the matching the proper kernel module. Again make sure
you have the correct version (example similar to: 2.6.11-1.1369_FC4).
Use the ‘uname -rm’ command for more information.

Go to http://linux-ntfs.sourceforge.net/rpm/fedora4.html
for the module/rpm.
Go to http://linux-ntfs.sourceforge.net/rpm/instructions.html

for the instructions.

[root@charon fc4]# uname -rm
2.6.11-1.1369_FC4 i686

I selected ’2.6.11-1.1369_FC4′ ‘i686′ for my Athlon-XP computer. Both parts MUST match.

[root@charon fc4]# rpm -ivh kernel-module-ntfs-2.6.11-1.1369_FC4-2.1.22-0.rr.6.0.i686.rpm
Preparing… ########################################### [100%]
1:kernel-module-ntfs-2.6.########################################### [100%]

To allow access to NTFS partitions you must (1) check how many partitions
you have, (2) create mount points, (3) mount partitions, and (4) update fstab
to mount at next boot.

Check Partitions

Check how many NTFS partitions you have:

[root@charon fc4]# fdisk -lu /dev/hda | grep NTFS
/dev/hda1 * 63 16771859 8385898+ 7 HPFS/NTFS
/dev/hda2 16771860 33543719 8385930 7 HPFS/NTFS
/dev/hda3 33752628 67312349 16779861 7 HPFS/NTFS

Usually the first will be C drive, next D, etc.

Create Mount Points

Instead of /media/, you can also use /mnt/, both will work, but make
sure to make the correct edits in all places.

[root@charon fc4]# cd /media/
[root@charon media]# mkdir c_drive
[root@charon media]# mkdir d_drive
[root@charon media]# mkdir e_drive

You don’t have to use these names, if you prefer to creat folders such as
movies, documents, or winxp, any name will work (without spaces).

Mount Partitions

Run ‘man mount’ to fully explain what “-r -o umask=0222″ does.

[root@charon media]# mount /dev/hda1 /media/c_drive/ -t ntfs -r -o umask=0222
[root@charon media]# mount /dev/hda2 /media/d_drive/ -t ntfs -r -o umask=0222
[root@charon media]# mount /dev/hda3 /media/e_drive/ -t ntfs -r -o umask=0222

Update /etc/fstab

Open ‘/etc/fstab’ in an editor and add these lines to the END of the file:

/dev/hda1 /media/c_drive ntfs ro,defaults,umask=0222 0 0
/dev/hda2 /media/d_drive ntfs ro,defaults,umask=0222 0 0
/dev/hda3 /media/e_drive ntfs ro,defaults,umask=0222 0 0

NOTE for FAT32 users

Insted of ‘NTFS’ above you can use ‘VFAT’ to mount your FAT32 partitions. No
extra modules or download are needed. Just replace ‘vfat’ for ‘ntfs’ when
mounting and when editting ‘/etc/fstab’.

FAT32 read and write is supported. If you wish to mount read/write,
then use: ‘-rw’ when Mounting Partitions, and ‘rw,defaults,umask=0000 0 0′ when
editing ‘/etc/fstab’.

Update:
Habis download, langsung dicobain sesuai petunjuk di atas dan berhasil.

Posted in Linux, TipsTricks